Tippmann X7 Paintball Marker
The stock X-7 includes:
Magnesium receiver which is extremely lightweight and durable
Cyclone EP (Enhanced Performance) system feeds up to 20 BPS
Air-thru stock compatible system eliminates gas line under the marker
Low profile, offset hopper for clear site line
Modular shroud with four rails to add on sights and scopes
AR15 style magazine with built in tool storage
Picatinny top rail to easily add new risers, sights or handles
Upgraded adjustable rear site helps with long range aiming
Push pin design for easy field stripping and accessory add ons
Maintenance pack, barrel sleeve, and gun oil
The Tippmann X-7 website can be found at
Features
Caliber: 0.68
Action: Semi-automatic
Power: CO2, compressed air, nitrogen
Hopper Capacity: 200
CO2 Capacity: NA
Feed rate: 20 BPS with e-Grip
Firing rate: Up to 20 BPS with e-Grip
Trigger: Standard
Barrel length: 8.5 inches
Length: 20 inches
Weight: 4.1 lbs. (without tank)
Effective Range: 150+ ft
Tippmann X7 Accessories
X7 9mm Mag Well (M5 Style Magazines)
X7 Flatline Barrel
X7 Air-Thru Commando Stock
X7 LP Cyclone Hopper
X7 AK-47 Foregrip
X7 M16 Carry Handle
X7 AK-47 Mag
X7 M16 Foregrip
X7 AK-47 Sight
X7 M16 Mag
X7 Assault Carry Handle
X7 M16 Sight
X7 Assault Mag (Short)
X7 M16 Vertical Handle
X7 Collapsible Car Stock
X7 M5 Mag (Curved)
X7 Double Trigger Kit
X7 M5 Mag (Straight)
X7 EGrip Electronic Upgrade Kit
X7 Response Trigger Kit
Cyclone-Feed System
Tippmann X7s utilize a revolutionary concept called the Cyclone-Feed System. It aims to do away with expensive agitating hoppers and electric loaders.
The Cyclone™ Feed System links the feeder sprocket to the air system for synchronized ball feed for reduced breakage and jamming. It feeds up to 15 balls per second and includes a wide mouth 200 Round Hopper that attaches via quick release elbow.
Modifiability
The X-7 is probably the most modifiable paintball marker in existence. Some are performance upgrades, while others are purely aesthetic. Kits available at many stores and websites can allow the X-7 to resemble many real-world firearms (see Appearance)
Some of the many upgrades include:
- Barrels
- Expansion Chambers
- Compressed Air Low-Pressure Kits
- Camouflage Kits
- Electronic Upgrades
- Triggers
- Tactical Shrouds
- Foregrips/False Magazines
- Stocks
- Body Kits
- Drop Forwards
- Hoppers (due to the unique Cyclone-Feed System, only four hoppers [the stock hopper, Ricochet hopper, TAC-Cap loader, and a 240 round ammo box version] are available).
The upgrades available from Tippmann specifically for the X-7 include the CAR-stock, Response Trigger, E-Grip, Low-Pressure Kit, Expansion Chamber, Universal Mount, 98 - X-7 Barrel Adaptor, Remote Line, Sniper Barrel (12", 14", 16"), Camouflage Graphics Kit, Double Trigger Kit and Flatline Barrel System.
Flatline Barrel System
The Flatline barrel is the first curved paintball barrel. The slight "S"-shaped curvature, in addition to a roughly honed surface at select points in the barrel, creates backspin on the ball which increases its range by 100 feet over a standard barrel. It is not quite as accurate as many other paintball barrels, but it makes up for this with its added range. Another disadvantage is its tendency to break paintballs more easily. This can be remedied with higher quality paint, however.
The Flatline barrel has a somewhat "intimidating" look to it. The shroud for the barrel looks somewhat like that of a rifle or shotgun, and allows one to hold it as such.
E-Grip
The E-Trigger™ Electronic Upgrade Kit includes five firing modes (semi-auto, auto-response, full-auto, 3-shot burst, turbo) that can be changed in seconds for rapid (up to 17 balls per second) firing. Requires 9-volt battery. Does not work with 98 Custom.
Response Trigger System
The Response Trigger System is a firing system available for the X-7. The system uses a series of parts that are added to the gun to greatly increases firing rate for the marker. The system uses excess carbon dioxide or compressed air from the firing process to reset the trigger and sear with a pneumatic cylinder. The system can reset the trigger, even with moderate pressure on the trigger. When this happens, the pressure of the finger immediately pulls the trigger back again, to fire again. This effectively gives the shooter the ability to fire fully automatic. As such, it has been banned at some commercial paintball fields.
CAR Stock
A length-adjustable stock similar to the stock found on a M4 rifle. It replaces the endcap of the X-7. It features a ring for affixing a gun-sling.
Construction
Continuing the Tippmann tradition, the X-7 is very durable
and features a magnesium receiver is extremely lightweight and durable
with a high-impact shock
absorbing endcap. The X-7 can take much abuse as all parts are tough
and industrially designed. The exceptions to this are the Cyclone-Feed
System and the Response Trigger Kit, which both have lines that snake
along the receiever and can be snagged easily.
The receiver is held together by five push-pins that can be easily removed to allow easy field stripping. (see Field-Stripping)
Field-Stripping
Unlike previous Tippmann markers, the X-7 is very easy to field-strip and clean. This is done by removing five push-pins on the receiver, allowing it to come apart in two halves.
To field strip an X-7 marker:
- Uncock marker (hold cocking-handle back and pull trigger; allow handle to move to original position) and eject paintball from chamber.
- Depressurize the marker by unscrewing the propellant supply and firing dry to rid marker of any latent gas.
- Remove five push-pins (A, B, C, D and E). Use pliers and lubricate with gun oil if pins are difficult to remove.
- Take apart receiver assembly.
- Clean chamber and bolt assembly.
- Lubricate O-Rings with a few drops of gun oil.
- Reassemble marker and replace push-pins.
Tippmann X7 Paintball Glossary:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
External Links
- Tippmann Pneumatics: X-7
- X-7 on Paintballguns.net
- Tippmann X7 Flatline Barrel at Paintball-Online.com
- Paintball Guns, Hand Gun
- The *Official* Tippmann X7 Pre-Release Information/Discussion ...
/300px-X7Picme.jpg)
/tippmann-x7-ak47.gif)
/Cyclonefeed.jpg)
/tippmann-x7-m16.gif)
/flatline_barrel.jpg)
/02-eg.jpg)
/rt-03.jpg)
/X7_carstock.jpg)